MAIL 英文版 繁體版 簡體版
 
About us |
Contact us |
Products Listing |
DATA BOOK |
ISO 9001
 
 Photograph
 Company Profile
 Organizaty Assurance Policy
 Major Materials Approved Supplier List
 Engineering and Quality Control System
 Calibration System
 Flow Chart of the Manufacturing Process
 System of Quality Service & Claim Action Route
 Main Functions of the Quality Control Department
 Weekly Test
 Reliability Experiment
 Targets and Schedule

 


●I.Q.C. (Incoming Quality Control)
1. New vendor evaluation
2. Vendor survey
3. Incoming (materials, parts,chemicals)inspection
4. Incoming quality analysis
5. Purchasing specifications
6. Lead evaluation
7. Silicone wafer analysis
8. Solder waferanalysis
9. Silicone rubber function test
10. Molding compound evaluation
11.Corrective action follow- up fordefective materials
12. First in, first out check

●I.P.Q.C. (In-Process Quality Control)
1. Quality control
2. Processing analysis
3. Statistical analysis
4. Failure analysis
5. Soldering analysis
6. Etching analysis
7. Control charts
8. Engineering change notifications
9. Review of operating instructions
10. Production yield analysis
11. Scrap material control
12. Rejected lot analysis
13. Corrective action
14. Check testing equipment calibration
15. Pull, break, bend, twist, and flammability tests

●O.Q.C. (Outgoing Quality Control)
1. Outgoing inspection and product analysis
2. Customer specification review
3. Internal specifications review
4. Routine inspections/customer records
5. Documentation check
6. Provide certification
7. Statistical analysis
8. Correlation with customer
9. Sampling check
10.Packing standards review

●HI-REL (High Reliability Laboratory)
1. Environmental and life qualification
· Terminal strength
· Solvent resistance
· Solderability
· Solder resistance
· Forward surge
· Temperature cycling
· Thermal shock
· Humidity test
· Pressure cooker test
· Operating life
· Thermal fatigue
· High temperature reverse bias
· High temperature storage
2. Product family surveillance analysis
3. Customer specification review
4. Test procedure set up
5. New process device and packing evaluation
6. Failure analysis
7. Corrective action
8. Product standard

●QA (Quality Assurance)
1. QC system evaluation
2. Quality cost evaluation
3. Calibration system monitoring
4. Specification and drawing review
5. Quality improvement activities
6. Quality control circle
7. PPM Program
8. Design review


●QS (Quality Service)
1. Reply to customers' claim
2. Conduct quality survey
3. Failure mode defects analysis, and verification
4. Product shipment, packing, and storage analysis
5. Product safety specification review

AE (Application Engineering)
1. Sample order preparation
2. Issue internal product specifications
3. Customer specification review
4. Evaluation of new products
5. Product failure analysis
6. Catalog and date sheet preparation
7. Rectifier application consulting

Calibration Center
1. Equipment calibration and set up
2. Evaluation, calibration, and accuracy check of new equipment


7th Floor, #208, Ta-Tung Road, Section 3,Hsi-Chih City, Taipei , Taiwan, R.O.C.
Telephone: 886-2-86473430 Fax: 886-2-86473450