MAIL 英文版 繁體版 簡體版
 
關於我們 |
聯絡方式 |
產品列表(英) |
DATA BOOK(英) |
ISO 9001
 
  公司照片
  公司簡介
  品質保證政策
  主要原物料合格供應商
 工程與品質納制系統
 校正系統
 品質管制
 服務行動和產品認可回饋
 品質部門主要功能
 品質改進計畫
 信賴度實驗
 百萬分之一計劃(PPM) 和 過程統計控制(SPC)

 


測試實驗 測試條件 依據
1. Solder Resistance 焊錫耐熱性 @260±5°C for 10±2 sec.
Immerse body into solder 1/16“±1/32”
MIL-STD-750C
METHOD-2031
2. Solderability焊錫附著性 @230±5°C for 5 sec. MIL-STD-202F
METHOD-208
3. Pull 拉力試驗 2 Kg in axial lead direction for 10 sec. MIL-STD-750C
METHOD-2036
4. Bend Lead 彎曲試驗 0.5 Kg weight applied to each lead bending
arc 90°±5° for 3 times
MIL-STD-750C
METHOD-2036
5. High Temperature Reverse Bias  高溫逆向電壓試驗 VR=80% Rated @ TA=100°C FOR 168/500Hr. MIL-STD-750C
METHOD-1026
6. Operation Life順向動作生命 Rated average rectifier current@ TA=25°C for 168/1000 hrs. MIL-STD-750C
METHOD-1027
7. Intermittent Operation Life
  斷續通電壽命試驗
On state: TJ=125°C-175°C with rated IRMS power for 5 min.
Off state: TJ= TA+15°C with cool forced air, on and off for 1000 cycles
MIL-STD-750C
METHOD-1036
8. Pressure Cooker壓力鍋 15 PSIG @ TA=121° for 4 hrs.  
9. Temperature Cycling
  溫度循環
-55°C to + 125°C dwelled for 15 min. and transferred for 5 min., total 10 cycles MIL-STD-750C
METHOD-1051
10. Thermal Shock溫度衝擊 0°C for 5 min., rise to 100°C for 5 min.,total 10 cycles MIL-STD-750C
METHOD-1056
11. Forward Surge順向電流衝擊 8.3 ms single half sine-wave superimposed on rated load, one surge. MIL-STD-750
METHOD-4066-2
12. Humidity 恆溫恆濕試驗 @ TA=65°C, RH=98% for 168/500 hrs. MIL-STD-202F
METHOD-1038
13. High Temperature Storage Life
  高溫存放壽命
@150° for 168/500 hrs. MIL-STD-750C
METHOD-1031
14. Solvent Resistance Dip into freon @ 25°C for 1 min. MIL-STD-202F
METHOD-215
* UPM performs the above reliability experiments by using MIL-STD-195000.
* UPM‘s devices meet the requirements of reliability tests.

台灣台北縣汐止市大同路三段208號7樓
電 話: 886-2-86473430 傳 真: 886-2-86473450